 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
 |
|
 |
|
|
 |
|
|
 |
|
|
Ultra Dent Tools 951-784-9905 |
Ultra Dent Tools - PDR News Page |
June 2010
We are pleased to introduce our new line up of 48 spring steel tools which will be available for approximately 25% less than our stainless tools. These tools are similar but different enough to expand your choices of whats available at Ultra.
The Hand Tool Set #25 is made from music wire, which is bendable, yet tough. There are bendable and rigid tools in the 5/16' and larger. And several come with inline handle configurations which will give you maximum power & versatility.
Note: The inline handle can be ordered in different positions if requested, as well as our octagonal male joints, for an additional charge.
June 2009
The new advanced body tech packages, Set #19 & Set #20 have been released:
Here is the new advanced body tech package set #19.
This set includes 5 of the most useful tools available, plus 9 most needed accessories.
Includes a 30 minute video that explains the use of each tool and accessory.Includes: 3615, 1422, 5616, 7603, ST1206, A4C, A18, A23, A24, A25, A35, A36, A36B, A36E, A47C
Here is the new advanced body tech package set #20.
Comes with all three Instructional DVDs!
Includes: 3615,1422,56J2,5603A,5608A,5616,3804,3809,7605,1204,ST3803,ST3810,ST1207,SHT1,SHT2,SHT4
A96B,A13,A18,A19,A23,A24,A25,A25A,A32,A37,A36E,A36F,A36G,A36H,A47D,A48D,A49D
November 2008
We Build Custom Tools:
We can make any custom tool to your specs. All you have to do is draw a side view on an 8 ½ x 11 sheet of paper along with the following: Tool Diameter, overall width from tip to the end of the handle, type and direction of handle, notate if you want it heat treated or bendable. Then fax or email it to us. There is a $10-$20 extra charge for custom tools, the lead time is 1-2 weeks, sometimes 3 depending request.
Our Fax is 951-784-9906
E-mail:sales@ultradenttools.com
October 2008
Our Soft-tip screw-on tools now all come with a new Medium tip at no extra charge. This tip has a radius between the standard soft-tip and the pencil point.
Click here to check out the new A44M.
August 2008
Ultra Dent Tools is looking for a full time trainer. Please send an email to sales@ultradenttools.com if you are interested.
July 2008
Ultra Dent Tools is proud to announce Tiddy Tab availability. We are the first resellers of Tiddy Tabs in the United States.
Softtip Change
We have converted the stud size of the screw-on softtip tools to 5/16 -18 thread which is a bigger, stronger stud. The stud is now glued into the tips instead of the tool. This will improve the strength of the tips and extensions while working. Also, the tips from several other companies' tools will be interchangeable with our tools now.You can upgrade your existing ULTRA Screw-On Tip Tools by sending your tool back. We will re-drill and tap out the tool to the 5/16-18 thread for a $20.00 labor charge. You can also trade your existing tip set in for a $20 credit. Expect a 1 - 2 day turnaround & ship time.
May 2006
You may have noticed that the Technician listing page is UP and running. Thanks for the positive response those of you that let us list you! We hope you receive a great response from our listing. Please remember this is a free service, and the more technicians we list, the more this listing will be used by your customers and businesses looking for YOU, the DENT technicians!
April 2006
Ultra Dent Tools is interested in assisting PDR technicians across the nation. If we receive a large enough show of interest we will create a listing page by State, County, City and Business/Individual Name with address and contact phone(s) and website for PDR technicians. The simplest listing will be free and available for clients to search through when looking for PRD service local technicians. We are already listed with many search engines so the site listing will help to bring PDR business for listed technicians free-of-charge. Proof of current PDR technician status will be required. We reserve the right to refuse listing anyone for any reason.
We will happily put a free website link in our free technician listing for our website clients Send e-mail inquiries to webmaster@ultradenttools.com or contact us for more information.
November 2004
We did extensive research and ask our customers many questions regarding our tools. We proudly discovered that many customers were looking for tools that would be an aid to there Daily Body Repairs. We now have put together two remarkable Body Tech Packages that can decrease your body labor time 30% to 50% while training yourself in PDR at the same time. These Body Tech Packages can be used as an aid to increase productivity, shorten repair time and minimize repair area. Benefits gained would be eliminate blend panels, ease color match issues and metal finish faster and more complete. These two sets enable Body Shop Professionals to maintain there busy repair schedules and provide the next levels of repair. Does Your Shop Do PDR see links below.
June 2004
Our hottest news is that the adjustable/interchangeable tool handle (Patent-pending) we've had in R&D is now in production and available!
A-96B is a 90° Aluminum Adjustable/Interchangeable Handle
A-96C is a solid, octagonal male joint (Patent-pending) that can be permanently attached to any tool 1/4" thru 5/8" in diameter. It retails for $45.00. This price includes welding labor.
A-96D is a Small Adjustable/Interchangeable T-Handle
A-96E is a Medium Adjustable/Interchangeable T-Handle
A-96F is a Large Adjustable/Interchangeable T-Handle
A-96HS This is our top of the line handle set that gives you the the option of using these (4) handles. The AH-2 90 deg Alum handle - the TH6B,TH-6, and the TH-7 all are standard rubber dipped T-Handles 1" 1/4 X. 5"3/8 - 1"1/4 X 6"1/2 - 1"1/4 X7"3/8
This new adjustable/interchangeable handle will give you tremendous versatility with fewer tools. You will no longer need the right and left versions of our door tools. One tool will give you eight different set points of rotation. Best of all, the handle can be detached and changed to another tool. We'll be publishing a list of all tools compatible with this new system. In the meantime call us if you'd like to give this innovative design a try on a new tool. We can also retrofit the adjustable/interchangeable handle to your tool(s).
General Contact E-Mail
sales@ultradenttools.com
Questions or Problems?
Please E-mail: sales@ultradenttools.com
This Website is Best Viewed at a Resolutionn 1280x1024 or Higher
PRICES ON OUR WEBSITE MAY OR MAY NOT BE CURRENT PRICES IN OUR STORES.
© copyright 2009 Ultra Dent Tools, Inc., All Rights Reserved.
MATERIAL AND PHOTOS ON THIS SITE ARE THE COPYRIGHTED PROPERTY OF ULTRA DENT TOOLS, INC.
